Use this air filter size calculator to convert the nominal size printed on a filter into its typical actual dimensions, see the filter’s face area, and check face velocity for your system’s airflow.
Air filter size finder
Turn the nominal size printed on a filter into its real measurements, and check filter face velocity.
- Typical actual size
- –
- Face area
- –
- Face velocity
- –
Actual sizes vary slightly by brand, so measure your slot. Face velocity under about 300 fpm suits 1-inch pleated filters; higher values suggest a bigger or deeper filter.
Nominal vs actual size
Filters are labeled with a rounded nominal size, such as 16 x 25 x 1, but are actually about half an inch smaller in length and width, and a 1-inch filter is usually about 3/4 inch thick. That’s so they slide into slots built to the nominal size. Deep 4- and 5-inch media filters vary by brand. See air filter sizes explained.
What face velocity means
Face velocity is how fast air approaches the filter, in feet per minute (fpm): airflow divided by the filter’s face area. Higher face velocity means more resistance and faster loading. Many 1-inch pleated filters perform best below about 300 fpm. Systems typically move about 400 CFM per ton, so a 3-ton system moves around 1,200 CFM.
| System size | Approx. airflow | Face area for ~300 fpm |
|---|---|---|
| 2 tons | 800 CFM | About 2.7 sq ft |
| 3 tons | 1,200 CFM | About 4 sq ft |
| 4 tons | 1,600 CFM | About 5.3 sq ft |
| 5 tons | 2,000 CFM | About 6.7 sq ft |
A 16 x 25 filter has about 2.8 square feet of face area, so a 3-ton system on a single 16 x 25 x 1 filter has high face velocity. Larger or additional returns, or a deeper filter, help. See 1 inch vs 4 inch air filter and high MERV filter.
How to find your filter size
- Read the size printed on your current filter.
- If there’s none, measure the filter and round up.
- If there’s no filter, measure the slot.
- Check the equipment manual for media cabinet sizes.
Air filter size calculator FAQ
Why is my filter smaller than the size on the label?
Nominal sizes are rounded; actual filters are slightly smaller so they fit the slot.
What is a good filter face velocity?
Below about 300 fpm for many 1-inch pleated filters; deeper filters handle higher airflow with less resistance.
Can I use a bigger filter?
Only if the slot or grille is designed for it. A larger return grille or media cabinet can be installed by a technician.
What if my filter size isn’t sold in stores?
Order custom sizes online, and never trim or force a filter to fit.
