Use this AC size calculator for a quick estimate of the cooling capacity your home needs. Enter your conditioned floor area, climate, ceiling height, insulation level, sun exposure and household size, and it estimates the cooling load in BTUs per hour and the matching system size in tons.
AC size calculator
A quick rule-of-thumb estimate of the cooling capacity your home needs.
- Suggested size
- –
- Cooling load
- –
- BTU per sq ft
- –
A ballpark only. Contractors should size equipment with an ACCA Manual J load calculation, which accounts for windows, orientation, duct location and airtightness.
How the AC size calculator works
It starts with a rule-of-thumb load per square foot for your climate, then adjusts for ceiling height, insulation and windows, sun exposure and extra occupants. One ton of cooling equals 12,000 BTUs per hour. Results are rounded to the nearest half ton, the way residential equipment is usually sold.
Why proper sizing matters
Oversized air conditioners cool the house quickly and shut off before they remove much humidity. The result is a cool but clammy home, more temperature swings and more wear from frequent starts. Undersized systems run constantly and can’t keep up on the hottest days. Neither is good for comfort or efficiency. See the best indoor humidity level.
Typical results
| Home size (moderate climate, 8 ft ceilings) | Typical estimate |
|---|---|
| 1,000 sq ft | 2 tons |
| 1,500 sq ft | 3 tons |
| 2,000 sq ft | 4 tons |
| 2,500 sq ft | 5 tons |
Well-insulated newer homes often need less; older, leaky homes in hot climates often need more. A professional load calculation frequently finds a smaller system than rules of thumb suggest.
Get a Manual J load calculation
Contractors should size equipment using an ACCA Manual J load calculation, which accounts for window area and orientation, insulation levels, air leakage, duct location and local design temperatures. ENERGY STAR’s quality installation guidance includes proper sizing. Ask every contractor whether their quote is based on a Manual J, and to share the results.
Fix the house before upsizing
Leaky, uninsulated attic ducts and a hot attic can make a properly sized AC feel too small. Sealing and insulating ducts often improves comfort more than a bigger unit. See how to seal air ducts and upstairs too hot.
Central air or mini split?
For additions, bonus rooms and homes without ducts, a ductless mini split sized to the room may be the better choice. See mini split vs central air.
AC size calculator FAQ
How many tons of AC do I need for 2,000 square feet?
Often around 3.5 to 4 tons in a moderate climate, but a Manual J calculation may show less for a well-insulated home.
Is it bad to oversize an AC?
Yes. Oversized units short-cycle and remove less humidity.
How many BTUs per square foot?
Rules of thumb range from about 20 to 26 BTU per square foot depending on climate and home, which is why a real load calculation is better.
Does ceiling height affect AC size?
Yes. Higher ceilings mean more air volume and often more heat gain.
Can I use this for a single room?
It’s designed for whole homes. For single rooms, room-sized units list recommended room areas, and mini splits should be sized by a contractor.
