We research products independently. When you buy through our links we may earn a commission. How we make money

CFM per Room Calculator

Use this CFM per room calculator to estimate how much airflow a room should get from your heating and cooling system. Choose your system size, enter the total conditioned area and the room’s area, and it estimates the room’s airflow share, the whole system’s airflow and a branch duct size to deliver it.

CFM per room calculator

Share your system's airflow across rooms by floor area to see what each room should get.

Room airflow
–
Branch duct size
–
Whole-system airflow
–

Area-based split for a first check. Rooms with big windows, sun-facing walls or rooms over garages usually need more than their share.

How it works

Most systems are designed to move about 350 to 400 cubic feet per minute (CFM) of air per ton of cooling. The calculator multiplies your system size by that airflow, then gives the room a share proportional to its floor area. It then uses the equal-friction method at 0.08 in. w.c. per 100 feet to suggest a round branch duct size.

Why area isn’t the whole story

An area-based split is a useful first check, but real room loads depend on:

  • Window area and which direction windows face.
  • Whether the room is over a garage, under an attic or on a slab.
  • Insulation and air leakage.
  • How many people and devices use the room.

Rooms with big west-facing windows or above garages usually need more than their area share. Interior rooms often need less. Professional designs use ACCA Manual J room-by-room loads.

How to use the result

  1. Compare with what the room actually gets. A technician can measure register airflow with a flow hood; a cheap anemometer gives a rough idea.
  2. If the room gets far less, check the damper, the duct condition and leaks. See weak airflow from vents.
  3. If the branch duct is smaller than the suggested size, it may be undersized. Use our duct size calculator for more detail.
  4. Balance the system with dampers. See how to balance HVAC dampers.

Typical airflow by room

Room Typical airflow
Small bathroom 30 – 50 CFM
Bedroom 80 – 150 CFM
Home office 80 – 150 CFM
Kitchen 100 – 200 CFM
Living room 150 – 300 CFM

These are rough ranges; climate and construction change them.

350 or 400 CFM per ton?

In humid climates, systems are often set closer to 350 CFM per ton so air moves more slowly across the coil and removes more moisture. In dry climates, 400 CFM per ton or more is common. Your contractor sets the blower speed.

CFM per room calculator FAQ

How many CFM does a bedroom need?

Often about 80 to 150 CFM, depending on size, windows and location.

How do I measure CFM at a register?

With a flow hood (professional) or an anemometer and the register’s free area (approximate).

What is CFM per ton?

The airflow a system moves per ton of cooling, typically about 350 to 400 CFM.

Why does my room get less CFM than calculated?

Common causes are closed dampers, long or crushed ducts, leaks and undersized branches.

Can I increase CFM to one room?

Open its damper, partly close others, fix the duct, or add a larger branch or second register.