We research products independently. When you buy through our links we may earn a commission. How we make money
Air filters

Where Is My Air Filter? 6 Common Locations and a Quick Way to Find It

“Where is my air filter?” is one of the most common questions new homeowners and renters ask. The air filter location depends on how your heating and cooling system is set up. In most homes it’s in one of two places: behind a return air grille in a wall or ceiling, or in a slot next to the furnace or air handler.

This guide covers six common locations, how to find your air filter quickly, and what to do if you find more than one or none at all.

Key takeaways

  • Most filters are behind a large return grille or in a slot at the furnace or air handler.
  • Follow the return duct back to the equipment to find the slot.
  • Some homes have filters in several return grilles.
  • Window and wall units, and ductless mini splits, have their own washable filters.

In this guide

1. Behind a return air grille

Look for a large grille, usually without louvers you can adjust, in a hallway ceiling or wall. A hinged grille with latches often holds a filter. This is common in homes with air handlers in attics or closets.

2. In a slot at the furnace

In basements and utility rooms, look at the furnace where the large return duct enters. There’s often a slot with a removable cover on the side or bottom.

3. Inside the furnace cabinet

Some furnaces hold the filter inside the blower compartment. Turn off the power, remove the lower panel, and look for a filter rack. Replace the panel before turning power back on; many furnaces have a safety switch on the door.

4. In a media cabinet

Many newer systems have a 4- or 5-inch filter cabinet installed between the return duct and the furnace. It has a hinged door or a removable panel. See 1 inch vs 4 inch air filter.

5. At an attic or crawlspace air handler

If the air handler is in the attic or crawlspace, the filter may be at the unit. It’s usually easier to put it at the return grille instead; ask a technician.

6. In ductless and window units

Ductless mini splits, window air conditioners and wall units have washable mesh filters behind the front cover. They need rinsing every few weeks during heavy use.

A quick way to find your air filter

  1. Find the furnace or air handler. Check basements, closets, garages, attics and crawlspaces.
  2. Identify the large return duct (it brings air back to the unit).
  3. Follow it toward the unit and look for a slot or cabinet.
  4. If there’s none, look for a large return grille inside the house.
  5. With the system running, hold a tissue near grilles. A return pulls the tissue toward it.

Multiple filters

Some homes have filters in several return grilles. Change all of them at the same time. If you find filters both at a grille and at the furnace, ask a technician whether you need both; double filtering adds resistance.

No filter at all?

If you can’t find one, the system may be running without a filter. Don’t run it that way. Call a technician to locate or add a filter slot.

Find your filter size

Once you’ve found the filter, read the size printed on its frame, such as 16 × 25 × 1. See air filter sizes and our air filter size calculator.

How to remove and install the filter

Once you’ve found your air filter location:

  1. Turn the system off at the thermostat.
  2. Open the grille or slot cover. Return grilles usually have latches or turn tabs; furnace slots may have a sliding cover.
  3. Note the airflow arrow on the old filter before removing it.
  4. Slide the filter out. Do it gently so dust doesn’t fall into the return.
  5. Check the size printed on the frame.
  6. Insert the new filter with the arrow pointing toward the furnace or air handler, away from the room. See air filter direction.
  7. Close the cover completely and turn the system back on.

Filter location by home type

Home type Most likely air filter location
House with a basement furnace Slot at the furnace, or a media cabinet
Slab home with an attic air handler Return grille in a hallway ceiling
Apartment or condo Return grille in a hallway, or closet with the air handler
Mobile or manufactured home Behind the furnace door, or a return grille
Home with a heat pump air handler in a closet Slot at the air handler or the return grille
Ductless mini split Washable mesh under the indoor unit’s front cover

Make it easy to find next time

  • Write the size and location on a label near the thermostat.
  • Mark the arrow direction on the furnace or grille.
  • Take a photo of the filter slot and save it on your phone.
  • Keep spare filters near the location.

What to do if the slot is hard to reach

If the only air filter location is at an attic or crawlspace air handler, changing it can be difficult, and filters often get forgotten. An HVAC contractor can install a filter grille at a return in the living space, so you can change it from a step stool. Make sure the old filter rack is removed or left empty so you’re not filtering twice.

Renters

In rentals, ask your landlord where the filter is and who’s responsible for changing it. Many leases make it the tenant’s job. Keep a few spares on hand and change it every one to three months.

Where is my air filter? FAQ

Where is the air filter in an apartment?

Usually behind a return grille in a hallway ceiling or wall, or in a closet with the air handler.

Is the air filter in the furnace or the vent?

Either. Many homes have it at a return grille; others at the furnace.

Do all vents have filters?

No. Only return grilles with filter racks, or the slot at the equipment.

How do I know which vent is the return?

It pulls air in. Supply vents blow air out.

How often should I change it?

Every 1 to 3 months for 1-inch filters. See how often to change your air filter and the ENERGY STAR heating and cooling guide. For choosing a new filter, see MERV ratings explained.