We research products independently. When you buy through our links we may earn a commission. How we make money
Indoor air quality

How to Improve Indoor Air Quality: 12 Proven Steps That Work

How to improve indoor air quality: How to Improve Indoor Air Quality: 12 Proven Steps That Work
Photo: Alex Tyson / Pexels

Knowing how to improve indoor air quality matters because most of us spend the majority of our time indoors, and indoor air can carry more pollutants than many people expect: fine particles from cooking, dust and pet dander, mold spores, chemical vapors from cleaners and furnishings, and combustion gases from fuel-burning appliances.

The EPA’s advice is consistent: the most effective ways to improve indoor air are to reduce or remove pollution sources and ventilate with clean outdoor air, with filtration as a useful supplement. This guide turns that into twelve proven steps, starting with the free ones.

Key takeaways

  • Source control comes first: remove or reduce what pollutes the air.
  • Ventilate: use kitchen and bathroom exhaust fans and bring in fresh air when outdoor air is clean.
  • Filter: a MERV 11 to 13 HVAC filter and portable HEPA purifiers in key rooms.
  • Keep humidity between 30 and 50 percent and maintain fuel-burning appliances.
How to improve indoor air quality example in a home
Photo by Athena Sandrini on Pexels
In this guide

The three pillars of indoor air quality

  1. Source control. Eliminate or reduce the things that release pollutants.
  2. Ventilation. Dilute indoor pollutants with clean outdoor air and exhaust them at the source.
  3. Air cleaning. Filter particles and, where appropriate, gases from the air.

The EPA’s guide to air cleaners states that the most effective ways to improve indoor air are to reduce or remove the sources of pollutants and to ventilate with clean outdoor air, and that research shows filtration can be an effective supplement.

12 proven steps to improve indoor air quality

1. Use the range hood every time you cook

Cooking, especially frying, broiling and searing, produces fine particles and, with gas stoves, combustion gases. Run a range hood that vents outdoors on high while cooking and for several minutes afterward. Cook on back burners, which hoods capture better.

2. Run bathroom fans during and after showers

Bathroom exhaust fans remove moisture that feeds mold. Run them during showers and for 20 minutes afterward. Make sure they vent outside, not into the attic.

3. Keep humidity between 30 and 50 percent

High humidity encourages dust mites and mold; very low humidity dries skin and airways. The EPA recommends keeping indoor humidity below 60 percent, ideally 30 to 50 percent. See the best indoor humidity level.

4. Upgrade and maintain your HVAC filter

Use a pleated MERV 11 to 13 filter if your system can handle it, the EPA’s suggested range for better particle capture, and change it on schedule. See MERV ratings explained and how often to change your air filter.

5. Add a portable HEPA purifier where you spend the most time

A purifier sized for the room using its clean air delivery rate (CADR) helps reduce fine particles, especially in bedrooms. See air purifier CADR and do air purifiers work.

6. Ventilate when outdoor air is clean

Open windows when outdoor air quality is good, or use mechanical ventilation such as an ERV or HRV in tight homes. See ERV vs HRV. Keep windows closed during high pollen or wildfire smoke.

7. Choose low-emission products

Paints, adhesives, new furniture, carpets and some cleaning products release volatile organic compounds (VOCs). Choose low-VOC products, air out new items, and ventilate well during and after painting or refinishing.

8. Don’t smoke indoors, and limit candles and incense

Tobacco smoke is one of the most harmful indoor pollutants. Candles, incense and wood fires also produce fine particles.

9. Maintain fuel-burning appliances

Have furnaces, water heaters, fireplaces and gas dryers inspected regularly, and install carbon monoxide alarms on every level and near sleeping areas. The EPA recommends servicing fuel-burning furnaces, stoves and fireplaces before each heating season. See furnace carbon monoxide safety.

10. Fix leaks and dampness fast

The EPA advises drying water-damaged materials within 24 to 48 hours to prevent mold. Fix roof, plumbing and foundation leaks promptly.

11. Clean smarter

Vacuum with a HEPA vacuum, damp-dust instead of dry-dusting, wash bedding weekly in hot water and use doormats and a shoes-off policy to reduce tracked-in dirt. See why your house is so dusty.

12. Seal and maintain your duct system

Leaky return ducts pull dust, humidity and fumes from attics, crawlspaces and garages into your air. Seal them, keep the coil and drain pan clean, and check for mold. See sealing return air ducts.

Test for radon. Radon is an invisible, odorless radioactive gas that can enter homes from the ground. Inexpensive test kits tell you if your home needs mitigation; the EPA recommends testing.

Quick wins vs bigger projects

Step Cost Impact
Use range hood and bath fans Free High
Shoes off, HEPA vacuum, damp dusting Low Medium
Hygrometer and humidity control Low High
MERV 11–13 filter Low Medium to high
Portable HEPA purifier for bedroom $100 – $300 Medium to high
CO alarms $20 – $50 each Safety-critical
Radon test $15 – $50 Potentially life-saving
Seal return ducts Low to moderate Medium
ERV/HRV in a tight home $$$ High in tight homes

What doesn’t help much

  • Ozone generators sold as air purifiers. The EPA advises avoiding air cleaners that intentionally produce ozone, a lung irritant.
  • Air fresheners and plug-ins, which add VOCs rather than removing pollutants.
  • Duct cleaning as a routine fix. The EPA says it has never been shown to prevent health problems; it helps when ducts are genuinely contaminated. See is duct cleaning worth it.

How to know if it’s working

An indoor air quality monitor that measures PM2.5, CO2, humidity and VOCs shows how your home responds to cooking, ventilation and filtration. See indoor air quality monitor. Fewer odors, less dust and comfortable humidity are good everyday signs.

A worked example

A family in a newer, tightly built home notices stale air, condensation on bedroom windows and cooking smells that linger. A monitor shows CO2 climbing above 1,500 ppm overnight and humidity near 60 percent. They start using the range hood every time they cook, run bathroom fans on timers, upgrade to a MERV 11 filter, and later install an ERV. Overnight CO2 settles below 1,000 ppm, humidity drops to the mid-40s and the window condensation stops.

A simple priority order

  1. Control sources: ventilate cooking, avoid smoking indoors, store chemicals outside living areas.
  2. Ventilate: use exhaust fans, open windows when outdoor air is clean, consider mechanical ventilation.
  3. Control humidity: keep it between 30% and 50%.
  4. Filter: use the best HVAC filter your system can handle, plus room purifiers where needed.
  5. Test: radon and carbon monoxide need dedicated detectors and tests.

Use an indoor air quality monitor to see whether changes improve indoor air quality over time.

How to improve indoor air quality: FAQ

What is the fastest way to improve indoor air quality?

Remove pollution sources, run exhaust fans, ventilate when outdoor air is clean, and run a portable HEPA purifier in the room you’re in.

Do houseplants improve indoor air quality?

Studies suggest the number of plants needed to meaningfully clean indoor air is far higher than in a typical home. Enjoy them, but rely on ventilation and filtration.

Should I run my HVAC fan all the time for air quality?

Running it more filters more air, but in humid climates continuous fan in cooling mode can raise humidity. Use a circulate setting.

Are air purifiers worth it?

Portable HEPA purifiers sized for the room can reduce airborne particles and have been linked to improvements in some allergy and asthma symptoms.

How do I test my home’s air quality?

Use an indoor air quality monitor for particles, CO2 and humidity, test for radon, and install carbon monoxide alarms.

The bottom line

The best way to learn how to improve indoor air quality is to follow the EPA’s order: control sources, ventilate, then filter. Use exhaust fans, manage humidity, upgrade your filter, add a HEPA purifier where you sleep, maintain fuel-burning appliances and test for radon. For the EPA’s guidance, see its guide to air cleaners in the home.